Mob: +971506268246 Mob: +971554784948 Mob: +971543224686 Mob: +971504670267

polymet@pretread.com arulsabu@pretread.com arjun@pretread.com pretread@eim.ae

Pot Bearings

Home Products Bridge Bearings Pot Bearings

Steel Pot Bearing offered by pretread.com manufacture from UAE Dubai are  best suitable in a bridge or complex structure   at locations where availability of  low  space  and pot bearing devise of  grater load bearing  capacity is  required. Our Steel Pot Bearings are highly suited for curved o or and skewed bridges structures where high direction control and rotations are expected.
 
 
3 Types of Steel Pot bearings are offered by pretread.com
 
  • Fixed steel pot bearings , 
  • Direction controlled steel pot bearings 
  • Multi directional or universal directional steel pot bearings.
 
Fixed pot  bearing assemblies are designed to accommodate large vertical  loads through application of  piston and elastomer pad in the pot bearings contained inside a  pot with thick wall. Rotation of superstructure is obtained by an enclosed rubber pad inside  steel pot which  under high pressures  develops and works  fluid like behavior. This allows top part of pot bearing to rotate with respect to  bottom part of  bearing about at any horizontal axis. 
 
Horizontal movement is restricted in all directions at the same time accommodates large rotational movement bridge or the superstructure which it’s carrying. With addition of guide bars and ptfe Teflon and stainless steel plates  to fixed steel pot bearings -  multi-directional bearing device allows  horizontal movements to a  single direction at the same time resist externally-applied horizontal forces to  orthogonal direction. Orientation of direction controlled steel pot bearings guide bars will be  in direction parallel to  structural movement . , Direction controlled steel pot bearings can be used for longitudinal or transverse movement by changing its orientation. Pots bearings are offered either cast pot or machined pots offered by manufacture from UAE Dubai
 
Direction controlled steel pot bearings can be used for longitudinal or transverse movement by changing its orientation. Multidirectional pot bearing device normally uses a centrally guided bar with ptfe and stainless steel along centerline of bearing assembly for bearing devises where horizontal force does not exceeds 30 percent of vertical force. Pretread.com offers Edge Guided pot bearings with twin guide bars multi directional pot bearings which work on external pot plate. Sometimes an inverted pot assembly is used to provide an economic solution which works uniform bearing along S guide bars. By adding PTFE Teflon and stainless steel sliding surface between piston and a sole plate on top of piston creates a pot bearing assembly which allows horizontal movement in any direction. A multidirectional or universal directional bearing assembly allows smooth movement of super structure to externally applied horizontal forces.
 
 
Multi-directional bearing device or universal direction steel pot bearings  normally uses a centrally  guided  bar with ptfe and stainless steel  along the centerline of  bearing assembly for bearing devises where horizontal force does not exceeds 30 percent of  vertical force. Pretread.com offers  Edge Guided  twin guide bars which works on external  pot plate. Sometimes an inverted pot assembly is used to provide an economic solution which works  uniform bearing along S guide bars.
 
By adding PTFE  Teflon and stainless steel sliding surface between piston and a sole plate  on top of piston creates a pot bearing assembly which  allows horizontal movement in any direction. A multi-directional pot bearing or universal directional pot bearing assembly allows smooth movement of super structure to externally-applied horizontal forces.
 
Bearing Load Calculation¬ :- on receipt of load schedule, we will verify load schedule for your requirements of steel pot bearings and will recommend right type and size of bearing meeting parameters compared to AASHTO LRFD. Steel pot bearings offered by pretread.com are manufactured in UAE Middle East using high grade steel sourced from European Steel Mills. In-house water jet and CNC machining facility guarantees the best product at an affordable price and timely delivery. Zinc aluminum hot spray of outer structure provides best long corrosion resistance up to 25 years from manufacture from UAE Dubai
 
We also offer anchoring bolts for all our steel pot bearings
 
We do not out souse or manufacture our end products from any other country like many other manufactures and contact us directly for your requirements of steel pot bearings .All pot bearings offered are manufactured in UAE Dubai. Kindly contact us through load schedule sheet from Contact page